§ 13.08.060. Grading permit—Application—Site data.

Site data shall be submitted with the application and shall include but not be limited to the following items:

A.

Vicinity map showing location of the site involved;

B.

Map showing property boundaries and dimensions of area covered by application for permit;

C.

Plan showing buildings, roads, utilities or other improvements within the area and adjacent thereto that may be affected by the proposed work;

D.

A plan drawn at a scale that adequately shows the details of terrain and drainage, for the conditions existing before and after the proposed work. The use of a scale that does not show the details may be cause for rejection of the application. The plan shall show contours and the limiting dimensions and elevations within the limits of the graded area on completion of the work; the proposed drainage channels and facilities; the planned elevations, grades and slopes of excavations and embankments. This plan shall show the location of observed springs, swampy areas, areas subject to flooding, landslides, surface faults and mud flows. Elevations shall be based on USGS datum, unless waived by the director;

E.

Cross-section of the ground showing both original and proposed ground surfaces, with grades, slopes and elevations noted;

F.

A soils report including a general description of the earth and rock materials involved in the work as to classifications; bedding or other geological features; any other reports by soils engineer or geologist on the test borings; slide conditions existing or anticipated; the suitability of the material for its proposed use including data on expansive soils; recommendations for construction procedure to obtain required stability and relative compaction.

(Ord. 73-138 § 9(B), 1973.)